Our Technical Engineers are available to offer you best product advice any time you need
Electric core drill for use with stand. The DM 280 is an ideal choice for medium core drilling up to 350 mm diameter. The motor is very easy to operate and features several ergonomic features facilitating drilling and set up. Suitable for water evacuation, ventilation, angle drilling and stitch drilling.
| MODEL |
DM 280 (Low Speed Version) |
DM 280 (High Speed Version) |
|
|---|---|---|---|
| Recommended drill diameter (mm) | 50 - 350 | 25 - 250 | |
| Outer spindle thread | 1 1/4" 7 UNC | 1 1/4" 7 UNC | |
| UNC water coupling | G 1/4" | G 1/4" | |
| Weight (kg) | 13.0 | 13.0 | |
| Sound power level (dB (A)) | 97 | 97 | |
| Sound pressure level (dB (A)) | 88 | 88 | |
| ELECTRIC MOTOR | Single Phase | Single Phase | |
| Power (kW) | 2.7 | 2.7 | |
| Voltage (V) |
110 230 |
110 230 |
|
| Speeds | 3 | 3 | |
| Spindle speed (rpm) | Unloaded |
310 690 1190 |
450 1000 1730 |
| Loaded |
250 550 950 |
360 800 1380 |
|
Husqvarna diamond core drill bits
Kindly contact us for more information about the suitable core drill bit for your application
DS 50 GYRO
Kindly contact us for more information about the above mentioned model
WT 15i
Kindly contact us for more information about the above mentioned model
WT2GO
Kindly contact us for more information about the above mentioned model
W 250 P
Kindly contact us for more information about the above mentioned model
W 70 P
Kindly contact us for more information about the above mentioned model
Drill with maximum pressure
A LED indicator shows the load of the machine, allowing you to always drill at maximum pressure.
Durable and ergonomic design
Durable and shock-proof, designed to protect the electronics. Easy to carry and install thanks to low weight and ergonomic design.
Reliable gearbox
Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
Angle drilling
Drilling holes in stepless adjustable angles.
Barriers
Drilling for installation of stair rails, fences, etc.
Horizontal drilling
Drilling horizontally.
Stitch drilling
Drilling multiple holes next to each other to make openings.
Vertical drilling
Drilling upwards and downwards.
Easy start with reduced speed
To facilitate making a starter hole, speed is reduced by half using the Smart Start® button.
Overload protection
Increases productivity and extends service life.
Load indicator
The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.
Elgard™
The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life.
Softstart™
An electronic current limiter for soft starts with normal fuses. This gives you a smooth start with high productivity.
Water evacuation
Drilling for water evacuation.
Channels, pipes and cables
Drilling ventilation channels and holes for pipes and cables.
.png)
