Every November the construction industry of the Gulf walks through the same doors. Big 5 Global at Dubai World Trade Centre is where contractors, consultants, plant managers and procurement teams see a year of new equipment in four days, compare suppliers side by side, and sign the deals that shape the next year's site fleets.
This guide covers the practical details for 2026, the co-located shows worth your time, and a short list of questions that separate a good equipment purchase from an expensive one.
Big 5 Global 2026: dates, venue and hours
Big 5 Global 2026 runs from Monday 23 to Thursday 26 November 2026 at Dubai World Trade Centre Sheikh Saeed hall 2 Stand SS2 D101. Doors open at 11:00 on the Monday and 10:00 on the following three days, closing at 18:00 on Monday to Wednesday and 17:00 on Thursday. Visitors must be 21 or over.
Registered attendees can use the show's travel partner offers, including an airline discount for travel between 18 November and 11 December and ride discounts to and from the venue.
| Day | Date | Hours |
|---|---|---|
| Monday | 23 November 2026 | 11:00 to 18:00 |
| Tuesday | 24 November 2026 | 10:00 to 18:00 |
| Wednesday | 25 November 2026 | 10:00 to 18:00 |
| Thursday | 26 November 2026 | 10:00 to 17:00 |
Details are as published on the organiser's website at the time of writing. Check big5global.com for the latest before you travel.
The co-located shows that matter for site equipment
Big 5 Global is really a cluster of shows under one ticket. For anyone buying site machinery, three of them deserve a planned route:
- Heavy. The heavy machinery and plant show. Compaction equipment, rollers, generators and the bigger end of the site fleet live here.
- Totally Concrete. Everything from mixing and placing to finishing and cutting. If concrete mixers, poker vibrators, power trowels and floor saws are on your list, this is where the day starts.
- Marble & Stone World. Stone processing and installation, which means tile and stone cutting machines, bridge saws, diamond blades and large format tile tools.
How to get real value from four days
Arrive with a list, not a wander
The halls are large and the days are short. Before you go, write down the three or four purchases you expect to make in the next twelve months, with the specification you actually need: the lift thickness you compact, the tile sizes your fit-out crews cut, the cubic metres of concrete you mix per hour. A supplier can only help you if you can answer those questions on the stand.
See the machine run
Static displays tell you the colour. Ask for a demonstration, or for a site demo in the weeks after the show. A plate compactor on a carpeted stand reveals nothing about how it behaves on a trench backfill.
Compare like with like
Two mixers can both claim 400 litres. One means drum volume, the other means mixing volume, and the difference is a third of a batch. Two plates can both claim 20 kN. One compacts 30 cm, the other 40 cm, because plate size and frequency differ. Ask for the datasheet and compare the same line on each.
Six questions to ask any equipment supplier at the show
- Where are the spare parts held? A machine supported from a warehouse in Sharjah or Dubai is back on site in a day. A machine supported from overseas is not.
- Who does the servicing? In-house technicians, a subcontractor, or you? The answer changes the real cost of ownership.
- Is operator training included? Most equipment failures in the first year are operator related. Training at handover is cheap insurance.
- What is the warranty and who registers it? Ask the supplier to handle warranty registration so you are covered from day one.
- Can I get the datasheet now? A supplier who can hand you the specification on the stand has a product worth comparing. A supplier who will "send it later" often has nothing to compare.
- What is the lead time and is it in stock? Show pricing is only useful if the machine arrives before the project needs it.
Al Wisam Trading at Big 5 Global
Al Wisam Trading Co. L.L.C. has supplied construction and industrial equipment across the UAE and Oman from Sharjah for more than two decades. At Big 5 Global 2025 the company exhibited at Stand SS2 D101, showing SIRL concrete mixers built for long mixing hours, Batmatic forward plate compactors and rammers, and Battipav cutting solutions including precision tile saws. The brands Al Wisam represents cover most of what a site buyer comes to the show to see:
| Category | Brands supplied by Al Wisam Trading | Find them at |
|---|---|---|
| Concrete mixers | SIRL drum and pan mixers, Battipav bucket mixers | Totally Concrete |
| Compaction | Batmatic forward and reversible plates, rammers, double drum rollers | Heavy |
| Cutting and sawing | Battipav tile, marble and block saws, Husqvarna power cutters, diamond blades | Marble & Stone World, Totally Concrete |
| Rebar processing | METSA cutting and bending machines | Heavy |
| Power and air | DEPCO generators and portable compressors, Stephill generators | Heavy |
| Vertical access | 3S Industry hoists, elevators, mast climbers and platforms, AWTC suspended platforms | Heavy |
