Our Technical Engineers are available to offer you best product advice any time you need
Alimak LSH is a construction hoist designed for use inside elevator shafts during building construction. The construction hoist offers a number of features which enhance efficiency and drive productivity in comparison to traditional traction jump-lifts. The hoist, which can serve the highest floors, can be installed quickly with jumping operations doubling in efficiency.
MODEL | LSH | |
---|---|---|
Motor control | Frequency control (FC) | |
Max. Payload capacity (kg) | 2,000 | |
Max. Payload capacity with fall protection (kg) | 1,500 | |
Travelling speed (m/min) | 40 | |
Max. lifting height (m) | 115 * | |
Car width (internal) (m) | 1.5 | |
Car length (internal) (m) | 1.8 | |
Car height (internal) (m) | 2.8 | |
Max. load space per car (m3) | 7.5 | |
Motors | Quantity | 2 |
Power (kW) | 11 | |
Safety device type | ALIMAK | |
Power supply range | Voltage (V) | 400 |
Frequancy (Hz) | 50 | |
Fuse ratings (A) | 63 | |
Type of mast (mm) (Tubular steel with integrated rack) |
650 x 200 | |
Length mast section (m) | 1.508 | |
Weight mast section with 1 rack (kg) | 83.5 | |
Rack module | 5 | |
Min. shaft size (m) | 2.2 x 2.2 |
* Increased liftin height on request.